Wilckens Repair / Thinner

Wilckens EP-Fine (Feinspachtel)

Epoxyd-Feinspachtel is a solvent-free, 2-com-ponent Epoxy resin specially filled for repairing osmosis damage or similar in yachts and boats of polyester construction. It has an excellent thightness against diffusion. After the recommended surface preparation it can be used as a trowelling compound on aluminium, steel, wood and polyester for surfaces both above and below the waterline.

Reparatur von Osmoseschäden  
Geeignet für Einsatz auf GFK  
Geeignet für Einsatz auf Holz  
Geeignet für Einsatz auf Stahl   (with Epoxid-Primer)
Geeignet überwasser / unterwasser  /  
Verpackungseinheit 300 g

  = suitable        = not suitable

Wilckens EP-Light (Leichtspachtel)

EP is a water resistant Epoxy light filler which is outstanding by it´s low density.( less than 0,5g/cm³) The product can be applied up to 2 cm thickness without putting a noteworthy weight to the surface. Because of the special ingredients of the filler the new surface can be sanded easily and is watertight. Suitable for all kinds of hulls like GRP/ Aluminium and Steel.

Reparatur von Osmoseschäden  
Geeignet für Einsatz auf GFK  
Geeignet für Einsatz auf Holz  
Geeignet für Einsatz auf Stahl  
Geeignet überwasser / unterwasser  /  
Farbtöne verfügbar grey
Verpackungseinheit 300 g

  = suitable        = not suitable

Wilckens Epoxid-Harz

Epoxyd-Harz is a solvent-free, colourless, unfilled 2-component epoxy resin with a high substrate penetration. Moreover it cures without a sticky surface, even in thin layers. It has a broad range of application, including laminating (e. g. surf boards and boat construction), laminating to cover other materials (e. g. glass fibre reinforced plastic, old wood and metal hulls and keels), fastening (e. g. metal fittings and bulkheads) and gluing (e. g. tret-master, teak-decks, wood, metal and glass fibre reinforced plastic). Also used as a time-saving methodto fill and seal pores of wood in 1 - 2 applications. After curing Epoxyd-Harz is elastic and has a hard surface. All visible areas outside have to be covered by a DD-Hartlack.

Reparatur von Osmoseschäden  
Geeignet für Einsatz auf GFK  
Geeignet für Einsatz auf Holz  
Geeignet für Einsatz auf allen Metallen   (with Epoxid-Primer)
Geeignet überwasser / unterwasser  /  
Farbtöne verfügbar transparent
Verpackungseinheit 750 ml

  = suitable        = not suitable

Wilckens Verdünner

1K-Thinner: 1K-Thinner is a special thinner used to correct the viscosity of all 1-comp. paints and to clean the tools.

2K-EP-Thinner: 2K-EP-Thinner is a special thinner for 2-comp. products used to achieve the right viscosity of application and to clean tools. Also suitable for cleaning tools used for solvent-free 2-component products and for dissolving and removing wood-ingredients from the surface of tropical wood (e. g. teak).

2K-PU-Thinner: Special acetate thinner for adjusting the proper working consistency and equipment cleaning of DD-Hartlack and polyurethane coatings. In 2-pack system addition after mixing base and hardener.